BIG-IQ Setup Wizard (VMware) ============================================================== **Description:** In this lab, we will complete the setup wizard for BIG-IQ CM and DCD in Vmware ESXi. Refer to below AskF5 link for official documentation. `AskF5 Reference `__ Step 1: Setup Wizard ---------------------------------------------- Follow below steps to setup both BIG-IQ CM and DCD devices. The only difference will be step (2) below. #. When you first log into the BIG-IQ, you must complete the setup wizard. The first step is licensing. Enter in the Base Registration Key for your BIG-IQ CM, click **agree** to accept EULA and activate. Click **Next** to proceed to the next step .. NOTE:: If you cannot configure Internet access, use Manual activation |lab-1-1| #. Select **BIG-IQ Central Management** for CM. Select **BIG-IQ Data Collection Device** when configuring your logging node, click **Next** |lab-1-2| #. Specify the first BIG-IQ Hostname, Management Port IP Address, Management Port Route. Select Self-IP for discovery address (recommended) and enter an IP address from the internal subnet configured for your second network adapter in ESXi, click **Next** |lab-1-3| #. Configure your DNS, Time Server, and set your Time Zone, click **Next** |lab-1-4| #. Set Master key: , click **Next** |lab-1-5| .. IMPORTANT:: If this BIG-IQ is part of an HA or DCD configuration, make sure you keep track of the pass phrase, because it cannot be recovered if you lose it. #. Enter in the default (admin/admin, root/default) and new passwords for admin and root, click **Next** |lab-1-6| #. Confirm configuration and Launch |lab-1-7| .. |lab-1-1| image:: images/lab-1-1.png .. |lab-1-2| image:: images/lab-1-2.png .. |lab-1-3| image:: images/lab-1-3.png .. |lab-1-4| image:: images/lab-1-4.png .. |lab-1-5| image:: images/lab-1-5.png .. |lab-1-6| image:: images/lab-1-6.png .. |lab-1-7| image:: images/lab-1-7.png